why does my Toyota Corolla E170 (2013-2019) vibrate when I accelerate

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

472 words

Problem Statement

Learn how to diagnose and fix vibrations during acceleration in Toyota Corolla E170 (2013-2019). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before working on any components.

Symptoms

•Vibration felt through the steering wheel
•Increased noise levels during acceleration
•Shaking in the seats while accelerating
•Possible loss of power
•Vibration occurs only during acceleration, not at idle or coasting

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balance and alignment.
3
Examine the engine and transmission mounts for wear or damage.
4
Inspect driveshaft and CV joints for any signs of wear or damage.
5
Scan for error codes using an OBD-II scanner to check for any related issues.
6
Test the suspension components for any signs of wear or looseness.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Tire balancer

Parts Required

•Replacement tires (if needed)
•Engine and transmission mounts (if needed)
•CV joints or driveshaft (if needed)
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balance and alignment.
3
Examine the engine and transmission mounts for wear or damage.
4
Inspect driveshaft and CV joints for any signs of wear or damage.
5
Scan for error codes using an OBD-II scanner to check for any related issues.
6
Test the suspension components for any signs of wear or looseness.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and secure with jack stands.
Disconnect the battery to prevent any electrical issues.

2. Tire Inspection and Service

Inspect Tires:
- Check for uneven wear patterns or bulges.
- Replace any damaged tires.
Balance Tires:
- Remove the tires from the vehicle using a socket set.
- Take tires to a tire shop to balance and align.

3. Drivetrain Component Inspection

Check Engine and Transmission Mounts:
- Visually inspect mounts for cracks or separation.
- Replace any damaged mounts (use a socket set and torque wrench to remove and install).
Inspect Driveshaft and CV Joints:
- Examine for any excessive play or damage.
- Replace any worn CV joints or driveshafts as necessary (follow manufacturer torque specifications).

4. Suspension Component Check

Inspect Suspension:
- Check for loose or damaged components (control arms, struts, etc.).
- Tighten any loose bolts and replace damaged components.

5. Reassembly and Battery Reconnection

Reinstall any components removed during inspection.
Reconnect the battery, ensuring all connections are secure.