why is my Toyota Corolla E170 (2013-2019) steering making noise during turns

Toyota Corolla E170 (2013-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

496 words

Problem Statement

Learn how to diagnose and fix steering noise during turns in Toyota Corolla E170 (2013-2019). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Steering wheel makes a grinding or squealing noise during turns
•Difficulty in turning the steering wheel
•Steering feels loose or unresponsive
•Fluid leaks around the steering rack or pump
•Increased play in the steering wheel

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks around the power steering pump and steering rack.
3
Listen for noise while turning the steering wheel with the vehicle stationary.
4
Inspect the condition of the steering belt for wear or damage.
5
Test the power steering pump for proper operation using a pressure gauge.
6
Examine the tie rod ends and ball joints for wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Funnel
•Drain pan
•Socket set
•Torque wrench
•Wrench set
•Power steering fluid

Parts Required

•Power steering fluid
•Power steering belt
•Power steering pump (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the power steering fluid level and condition.
2
Check for any visible leaks around the power steering pump and steering rack.
3
Listen for noise while turning the steering wheel with the vehicle stationary.
4
Inspect the condition of the steering belt for wear or damage.
5
Test the power steering pump for proper operation using a pressure gauge.
6
Examine the tie rod ends and ball joints for wear.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the battery for safety.

2. Check and Replace Power Steering Fluid

Tools Required: Funnel, drain pan
Steps:
1. Locate the power steering fluid reservoir.
2. Remove the cap and check the fluid level; top off with the manufacturer-recommended fluid if low.
3. If the fluid is dirty or has a burnt smell, drain the old fluid into a drain pan.
4. Refill the reservoir with new power steering fluid.

3. Inspect and Replace Steering Belt

Tools Required: Socket set, torque wrench
Steps:
1. Locate the power steering belt and inspect it for cracks or fraying.
2. If damaged, loosen the tensioner and remove the old belt.
3. Install a new power steering belt, ensuring proper routing.
4. Tighten the tensioner to the manufacturer's specifications.

4. Inspect and Replace Power Steering Pump (if necessary)

Tools Required: Socket set, wrench set, power steering fluid
Steps:
1. Disconnect the power steering lines from the pump.
2. Remove the mounting bolts securing the power steering pump.
3. Install the new pump, ensuring all mounting bolts are torqued to specifications.
4. Reconnect the power steering lines, ensuring they are tight and leak-free.