FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E210 (2019-2024) - Toyota Corolla
Home/Cars/Toyota/Corolla/E210 (2019-2024)/how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

how to reset the maintenance light on my Toyota Corolla E210 (2019-2024)

Toyota Corolla E210 (2019-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
388 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota Corolla E210 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the engine is off before starting the process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notification for scheduled maintenance
  • •No engine performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No special tools required for resetting the maintenance light.

Parts Required

  • •No parts required.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary items: vehicle key and possibly a wrench if needed for other maintenance tasks.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition:

    • Ensure the vehicle is completely off before starting the reset process.

  2. Press and Hold the Trip Button:

    • Locate the "Trip" button on the instrument cluster (usually on the dashboard).
    • Press and hold the button firmly.

  3. Turn the Ignition On:

    • With the "Trip" button still pressed, turn the ignition switch to the "ON" position (do not start the engine).

  4. Wait for the Reset:

    • Keep holding the "Trip" button until the maintenance light flashes and then turns off. This usually takes about 10 seconds.

  5. Release the Trip Button:

    • Once the light has reset, release the "Trip" button.

  6. Turn Off the Ignition:

    • Turn the ignition switch back to the "OFF" position to complete the process.