FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019) - Toyota Highlander
Home/Cars/Toyota/Highlander/Third Generation (2014-2019)/how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
330 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2014-2019) with this simple step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and on a flat surface while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or scheduled maintenance
  • •No other engine performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required.
  • Ensure the vehicle is parked safely with the ignition off.
2. Resetting the Maintenance Light
  1. Turn Off Ignition
    • Make sure the ignition is turned off completely.
  2. Press and Hold the Odometer Reset Button
    • Locate the odometer reset button on the dashboard and press it down firmly.
  3. Turn Ignition to "On"
    • Without starting the engine, turn the ignition key to the "On" position (the position right before starting the engine).
  4. Continue Holding the Button
    • Keep holding the odometer reset button until the maintenance light flashes and then goes out (this may take about 10 seconds).
  5. Release the Button
    • Once the light is off, release the odometer reset button and turn the ignition back to the "Off" position.