how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing the reset procedure.

Symptoms

•Maintenance light is illuminated on the dashboard
•No other warning lights are present
•Vehicle has recently undergone scheduled maintenance

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Confirm that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip meter reset button.
5
While holding the trip meter reset button, turn the ignition switch back to the 'ON' position.
6
Continue holding the trip meter reset button until the maintenance light turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required, but a clean rag may be helpful

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Confirm that the odometer is displayed on the instrument cluster.
3
Turn off the ignition.
4
Press and hold the trip meter reset button.
5
While holding the trip meter reset button, turn the ignition switch back to the 'ON' position.
6
Continue holding the trip meter reset button until the maintenance light turns off.

Solution

1. Preparation

Ensure the vehicle is in a safe, stationary position.
Gather necessary tools, including a clean rag if needed for dashboard cleanliness.

2. Ignition Position

Turn the ignition switch to the "ON" position without starting the engine.
Confirm that the odometer reading is visible on the display.

3. Reset Procedure

Turn off the ignition switch.
Press and hold the trip meter reset button located on the instrument cluster.
While maintaining pressure on the button, turn the ignition switch back to the "ON" position.
Hold the trip meter reset button until you see the maintenance light blink and turn off.

4. Final Step

Release the trip meter reset button.
Turn off the ignition switch and then restart the vehicle to ensure the maintenance light is no longer illuminated.