how to reset the maintenance light on my Toyota Highlander Third Generation (2014-2019)

Toyota Highlander Third Generation (2014-2019)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

368 words

Problem Statement

Learn how to reset the maintenance light on your 2014-2019 Toyota Highlander with this step-by-step guide. Simple instructions for a quick fix.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and on a flat surface before starting the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•No engine performance issues present
•No warning codes or additional dashboard lights

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake pedal).
3
Locate the odometer/trip button on the dashboard.
4
Press and hold the odometer/trip button until the odometer display shows '000000' (or blinks).
5
Release the button and turn the ignition off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required for resetting the maintenance light.

Parts Required

•No parts required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is turned off.
2
Turn the key to the 'ON' position without starting the engine (or press the start button twice without pressing the brake pedal).
3
Locate the odometer/trip button on the dashboard.
4
Press and hold the odometer/trip button until the odometer display shows '000000' (or blinks).
5
Release the button and turn the ignition off.

Solution

1. Preparation

Ensure the vehicle is in a safe area with the engine off.
Gather necessary tools, if any (typically, no tools are required for this procedure).

2. Turn Ignition to "ON"

Insert the key and turn it to the "ON" position without starting the engine.
Alternatively, press the start button twice without engaging the brake pedal.

3. Reset the Maintenance Light

Locate the odometer/trip button on the dashboard.
Press and hold the odometer/trip button.
While holding the button, turn the ignition back to the "ON" position.
Continue holding the button until the odometer display shows "000000" or begins to blink.
Release the button, then turn the ignition off to complete the reset.