FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I address a Toyota Highlander with a malfunctioning fuel pump relay? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I address a Toyota Highlander with a malfunctioning fuel pump relay?

How do I address a Toyota Highlander with a malfunctioning fuel pump relay?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
571 words

Problem Statement

Learn how to diagnose and replace a malfunctioning fuel pump relay on a Toyota Highlander (2020-present) with step-by-step instructions and required tools.

Affected Component
fuel pump relay
Estimated Time
1-2 hours

Symptoms

  • •Engine cranking but not starting.
  • •Intermittent starting issues.
  • •Fuel pump not activating when the ignition is turned on.
  • •Warning lights on the dashboard.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Test light
  • •Jumper wires
  • •Screwdrivers (flat and Phillips)
  • •Pliers
  • •Replacement fuel pump relay
  • •Vehicle Service Manual

Additional Information

Affected Component
fuel pump relay
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Addressing a Malfunctioning Fuel Pump Relay on a Toyota Highlander (2020-Present)

Tools Required
  • Multimeter
  • Test light
  • Jumper wires
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Replacement fuel pump relay (if needed)
  • Vehicle Service Manual (for reference)
Repair Instructions
Step 1: Locate the Fuel Pump Relay
  1. Open the hood and locate the engine fuse box.
  2. Remove the cover to access the fuses and relays.
Step 2: Remove the Malfunctioning Relay
  1. Identify the fuel pump relay. The diagram on the fuse box cover can help you locate the correct relay.
  2. Use pliers to carefully pull the relay straight out of its socket.
Step 3: Install the New Relay
  1. Align the new fuel pump relay with the socket.
  2. Firmly press the relay into place until it is fully seated.
Step 4: Recheck the System
  1. Turn the ignition key to the "ON" position (without starting the engine).
  2. Listen for the fuel pump priming sound.
  3. If you have a test light, check for the power at the fuel pump connector to ensure the relay is functioning.
Step 5: Final Checks
  1. Start the engine. It should crank and start without issues.
  2. If the problem persists, recheck the fuses and wiring.
  3. If all else fails, consider further diagnostics on the fuel pump or associated wiring.
Step 6: Reassemble
  1. Replace the fuse box cover.
  2. Close the hood securely.
Conclusion

By following these steps, you should be able to diagnose and replace a malfunctioning fuel pump relay in your Toyota Highlander XU70. If issues persist after replacing the relay, further investigation into the fuel pump and its electrical connections may be necessary. Always refer to the vehicle's service manual for specific details and wiring diagrams.