How do I reset the tire pressure monitoring system in a 2023 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes

easy

Difficulty

low

Severity

3 min read

449 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) in your 2023 Toyota Highlander with step-by-step instructions and tips.

Affected Component

Tire Pressure Monitoring System (TPMS)

Symptoms

•TPMS warning light is illuminated on the dashboard
•Recent tire inflation or tire change
•The vehicle has been serviced, and the tires were removed or adjusted

Diagnostic Steps

1
Check Tire Pressures
2
Verify TPMS Light

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge (optional but recommended for verification)
•Owner’s manual (for reference)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the Tire Pressure Monitoring System (TPMS) in a 2023 Toyota Highlander

The Tire Pressure Monitoring System (TPMS) in your 2023 Toyota Highlander is designed to alert you when tire pressure is low. If you've inflated your tires to the correct pressure or changed a tire, you may need to reset the system. Below are the detailed steps to accomplish this.

Tools Required

Tire pressure gauge (optional but recommended for verification)
Owner’s manual (for reference)

Resetting the TPMS

Start the Vehicle:
- Sit in the driver’s seat and ensure that the vehicle is in the "On" position without starting the engine. If your Highlander has a push-to-start, press the start button twice without pressing the brake pedal.
Locate the TPMS Reset Button:
- The TPMS reset button is typically located beneath the steering wheel, near the brake pedal. Check your owner's manual for the exact location if necessary.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS warning light blinks three times and then turns off. This indicates that the system is resetting.
Drive the Vehicle:
- After releasing the button, drive the vehicle at speeds over 25 mph for about 10-15 minutes. This allows the TPMS to recalibrate and recognize the new tire pressures.
Check TPMS Light:
- After driving, check if the TPMS warning light has turned off. If it remains illuminated, there may be a fault in the system that requires further diagnosis.

Additional Notes

Temperature Effects: Tire pressure can change with temperature fluctuations. If the TPMS light comes on after temperature drops, verify tire pressure again.
Faulty Sensors: If the light persists even after resetting and proper inflation, you may have a faulty TPMS sensor that requires professional inspection and possible replacement.

Conclusion

Resetting the TPMS in a 2023 Toyota Highlander is a straightforward process involving checking tire pressures and using the reset button. If issues persist, consult a professional technician for further diagnosis. Regular maintenance of tire pressure is essential for safety and fuel efficiency.