FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot a malfunctioning fuel injector in my 2021 Toyota Highlander? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/How do I troubleshoot a malfunctioning fuel injector in my 2021 Toyota Highlander?

How do I troubleshoot a malfunctioning fuel injector in my 2021 Toyota Highlander?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0201-P0204
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
647 words

Problem Statement

Learn how to diagnose and repair a malfunctioning fuel injector in your 2021 Toyota Highlander with step-by-step instructions and required tools.

Error Code
P0201-P0204
Affected Component
fuel injector
Estimated Time
2-4 hours

Symptoms

  • •Engine Misfire
  • •Poor Fuel Economy
  • •Check Engine Light
  • •Excessive Smoke
  • •Hard Starting

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Fuel Pressure Gauge
  • •Basic Hand Tools (screwdrivers, wrenches, pliers)
  • •Safety Goggles and Gloves

Additional Information

Error Code
P0201-P0204
Affected Component
fuel injector
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting a Malfunctioning Fuel Injector in a 2021 Toyota Highlander
Repair Instructions

  1. Replacing a Faulty Injector:

    • Preparation:

      • Relieve the fuel system pressure by removing the fuel pump relay and cranking the engine for a few seconds.
      • Disconnect the negative battery terminal to avoid electrical shorts.

    • Removing the Injector:

      • Remove any engine cover if applicable.
      • Disconnect the electrical connector from the injector.
      • Remove the fuel rail bolts and carefully lift the rail off the injectors.
      • Extract the injector from the fuel rail, being careful of the O-rings.

    • Installing the New Injector:

      • Lubricate the new injector O-rings with engine oil.
      • Insert the new injector into the fuel rail and press it in firmly until it seats.
      • Reinstall the fuel rail onto the intake manifold and secure it with bolts.
      • Reconnect the electrical connectors to the injectors.

  2. Final Steps:

    • Reconnect the fuel pump relay and negative battery terminal.
    • Turn the ignition to the "ON" position to prime the fuel system.
    • Check for fuel leaks around the injectors and fuel rail.
    • Start the engine and ensure it runs smoothly without misfires.

  3. Clearing Codes:

    • Use the OBD-II scanner to clear any trouble codes from the vehicle's computer.
    • Take the vehicle for a short test drive to ensure that the issue is resolved.

Conclusion

Following these steps should help you diagnose and repair a malfunctioning fuel injector on your 2021 Toyota Highlander. If the problem persists after replacing the injector, further investigation may be needed to assess the ECM or wiring issues. Always consult the vehicle’s service manual for specific torque specifications and additional procedures.