how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

less than 10 minutes

Time

easy

Difficulty

low

Severity

2 min read

357 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2020-present) with this easy step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position before performing the reset

Symptoms

•Maintenance light illuminated on the dashboard
•Notification on the multi-information display indicating maintenance due
•Engine oil change reminder displayed

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position
2
Press and hold the odometer trip button on the instrument cluster
3
Turn the ignition switch to the 'ON' position without starting the engine
4
Continue to hold the odometer trip button until the maintenance light resets
5
Release the odometer trip button once the light goes off

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position
2
Press and hold the odometer trip button on the instrument cluster
3
Turn the ignition switch to the 'ON' position without starting the engine
4
Continue to hold the odometer trip button until the maintenance light resets
5
Release the odometer trip button once the light goes off

Solution

1. Preparation

Ensure the vehicle is parked safely with the engine off.
Gather necessary tools: None required.

2. Resetting the Maintenance Light

Access the Odometer Trip Button
- Locate the trip meter button on the instrument cluster.
Turn Off the Ignition
- Ensure the engine is completely off.
Press and Hold the Odometer Trip Button
- Press and hold the odometer trip button and keep it pressed.
Turn on the Ignition
- While holding the trip button, turn the ignition key to the "ON" position (do not start the engine).
Wait for the Reset Confirmation
- Continue holding the trip button until the maintenance light blinks and then goes off (this usually takes about 10 seconds).
Release the Trip Button
- Once the light is off, release the odometer trip button.