how to reset the maintenance light on my Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

349 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Highlander (2020-present) with this simple step-by-step guide. Quick and easy instructions.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Oil change or service reminder displayed
•No other engine or warning lights present

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal three times within five seconds.
4
Look for the maintenance light to flash and then turn off.
5
Turn the ignition back to the 'OFF' position to complete the reset process.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition (or press the start button without pressing the brake pedal).
3
Press the gas pedal three times within five seconds.
4
Look for the maintenance light to flash and then turn off.
5
Turn the ignition back to the 'OFF' position to complete the reset process.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface and the engine is off.
Gather any necessary tools (if applicable).

2. Ignition Position

Insert the key into the ignition or press the start button without engaging the brake.
Ensure all accessories are off (radio, lights, etc.).

3. Gas Pedal Procedure

Quickly press the gas pedal three times within five seconds.
Observe for any changes in the dashboard lights, particularly the maintenance light.

4. Turn Ignition Off

Turn the ignition key to the "OFF" position or press the start button again.
Wait a moment before starting the vehicle to ensure the reset is completed.