FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Highlander Fourth Generation (2020-present) - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/how to reset the maintenance light on Toyota Highlander Fourth Generation (2020-present)

how to reset the maintenance light on Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
331 words

Problem Statement

Learn how to reset the maintenance light on a 2020-present Toyota Highlander. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in a safe environment during the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification message indicating maintenance is due
  • •Vehicle reminder for scheduled service

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe location.
  • Gather necessary tools: none required for this reset.
2. Reset Maintenance Light
  1. Turn Off Ignition: Ensure the ignition switch is in the OFF position.
  2. Press and Hold Reset Button: Locate the trip meter reset button on the dashboard and press it firmly; do not release it yet.
  3. Turn Ignition On: Rotate the ignition switch to the ON position without starting the engine while still holding the reset button.
  4. Watch for Light Behavior: Keep an eye on the maintenance light; it will blink and eventually turn off.
  5. Release Button: Once the maintenance light is off, release the trip meter reset button.