how to reset the tire pressure light on Toyota Highlander Fourth Generation (2020-present)

Toyota Highlander Fourth Generation (2020-present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

366 words

Problem Statement

Learn how to reset the tire pressure light on your 2020-present Toyota Highlander. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

1
Check all tire pressures using a digital or manual tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure listed on the driver's door jamb.
3
Inspect tires for visible damage or punctures.
4
Ensure the spare tire is also checked, as some systems monitor it.
5
Verify that the TPMS sensors are functioning if the light remains on after resetting.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

•None required for the reset; possible TPMS sensor replacement if issues persist.

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Check all tire pressures using a digital or manual tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure listed on the driver's door jamb.
3
Inspect tires for visible damage or punctures.
4
Ensure the spare tire is also checked, as some systems monitor it.
5
Verify that the TPMS sensors are functioning if the light remains on after resetting.

Solution

1. Preparation

2. Resetting the Tire Pressure Light

Locate the TPMS reset button, usually found under the steering wheel or on the lower dashboard panel.
Press and hold the TPMS reset button until the tire pressure light blinks three times, then release it.
Start the vehicle and allow it to run for about 20 minutes to ensure the system recalibrates.
If the light remains on, repeat the reset process or check for faults in the TPMS.