FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the typical issues with the 2020 Toyota Highlander's exterior lights? - Toyota Highlander
Home/Cars/Toyota/Highlander/Fourth Generation (2020-present)/What are the typical issues with the 2020 Toyota Highlander's exterior lights?

What are the typical issues with the 2020 Toyota Highlander's exterior lights?

Toyota Highlander Fourth Generation (2020-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
673 words

Problem Statement

Learn about typical exterior light issues in the 2020 Toyota Highlander, including symptoms, diagnostic steps, and repair instructions.

Affected Component
exterior lights
Estimated Time
1-2 hours

Symptoms

  • •One or both headlights are dim or not functioning
  • •Flickering headlights while driving
  • •Headlight warning light on the dashboard
  • •Tail lights not illuminating
  • •Brake lights not functioning
  • •Warning lamp on the dashboard indicating light failure
  • •Turn signals do not blink or are hyper-flashing
  • •Indicator light on the dashboard remains lit without blinking

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Screwdriver set
  • •Multimeter
  • •Replacement bulbs
  • •Fuse puller
  • •Flasher relay (if necessary)

Additional Information

Affected Component
exterior lights
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Exterior Light Issues in the 2020 Toyota Highlander

The 2020 Toyota Highlander is known for its modern design and advanced features, but like any vehicle, it may experience exterior light issues. Below are some typical problems associated with the exterior lights, along with diagnostic steps, required tools, and repair instructions.

1. Headlight Malfunction
Tools Required:
  • Screwdriver set
  • Multimeter
  • Replacement bulbs (H11 for low beam, 9005 for high beam)
  • Wire connectors (if required)

Repair Instructions:

  1. Remove the Headlight Assembly:
    • Open the hood and locate the headlight assembly.
    • Remove screws/fasteners and detach the assembly from the vehicle.
  2. Replace the Bulb:
    • Disconnect the wiring harness from the bulb.
    • Remove the old bulb and replace it with a new one, avoiding touching the glass with bare hands.
  3. Reconnect and Test:
    • Reconnect the wiring harness and reinstall the headlight assembly.
    • Turn on the headlights to verify operation.
2. Tail Light Issues
Tools Required:
  • Screwdriver set
  • Multimeter
  • Replacement bulbs
  • Fuse puller

Repair Instructions:

  1. Remove the Tail Light Assembly:
    • Open the trunk and access the tail light assembly through the back panel.
    • Remove the screws/fasteners to detach the assembly.
  2. Replace Bulbs:
    • Remove the bulb socket by turning it counter-clockwise.
    • Replace the faulty bulb(s) with new ones.
  3. Check Brake Light Switch:
    • If brake lights are malfunctioning, inspect the brake light switch located near the brake pedal.
    • Replace the switch if faulty.
  4. Reinstall and Test:
    • Reassemble the tail light assembly and ensure it is secure.
    • Test the lights to confirm proper operation.
3. Turn Signal Problems
Tools Required:
  • Screwdriver set
  • Multimeter
  • Replacement bulbs
  • Flasher relay (if necessary)

Repair Instructions:

  1. Remove Turn Signal Assembly:
    • Access the turn signal assembly either from the front or side of the vehicle.
    • Remove screws/fasteners to detach the assembly.
  2. Replace Bulb or Relay:
    • If the bulb is burnt, replace it with a new one.
    • If the flasher relay is faulty, locate it in the fuse box and replace it.
  3. Reassemble and Test:
    • Reinstall the turn signal assembly.
    • Test the turn signals to ensure they are functioning correctly.
Conclusion

The exterior light issues in the 2020 Toyota Highlander can generally be diagnosed and repaired with basic automotive tools and some technical knowledge. Always ensure to use OEM parts for replacements to maintain vehicle integrity and safety. If problems persist after these steps, it may be advisable to consult a professional technician.