how to check transmission fluid level in Toyota Highlander XU70 (2020-Present)

Solution

1. Preparation

• Tools Needed: Lint-free cloth or paper towel, funnel (if adding fluid).
• Ensure the vehicle is parked on a flat surface with the engine running at idle.

2. Remove and Inspect the Dipstick

1. Locate the transmission dipstick.
2. Pull the dipstick out carefully to avoid any splash or spillage.
3. Wipe the dipstick clean with a lint-free cloth or paper towel.

3. Check Fluid Level

1. Reinsert the dipstick fully back into the tube.
2. Pull the dipstick out again and check the fluid level against the markings.
3. If the fluid is below the "Full" mark, proceed to the next step.

4. Add Transmission Fluid (if necessary)

1. Obtain the correct type of transmission fluid as specified in the owner's manual (typically Toyota ATF WS).
2. Using a funnel, add transmission fluid through the dipstick tube slowly to avoid overfilling.
3. Recheck the fluid level after adding fluid, repeating the dipstick removal and inspection process.

5. Final Inspection

1. Ensure that the dipstick is securely in place.
2. Close the hood and ensure all components are properly reassembled.