how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)

Toyota Highlander XU70 (2020-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide for easy maintenance light reset.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (or 'Neutral' for manual transmission) before performing this procedure to prevent accidental movement.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Possible reminder messages in the vehicle's information display

Diagnostic Steps

1
Verify that all scheduled maintenance tasks have been completed (oil change, filter replacement, etc.).
2
Turn the ignition to the 'ON' position without starting the engine.
3
Navigate to the 'Settings' menu on the Multi-Information Display (MID) using the steering wheel controls.
4
Select 'Maintenance' from the settings options.
5
Confirm the maintenance reset option.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key fob

Parts Required

•None required for the reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all scheduled maintenance tasks have been completed (oil change, filter replacement, etc.).
2
Turn the ignition to the 'ON' position without starting the engine.
3
Navigate to the 'Settings' menu on the Multi-Information Display (MID) using the steering wheel controls.
4
Select 'Maintenance' from the settings options.
5
Confirm the maintenance reset option.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle key fob available to start the process.

2. Access the Ignition

Insert the key fob into the ignition slot or have it inside the vehicle, depending on the model variant (smart key).
Turn the ignition to the "ON" position without starting the engine. This is typically the second position in the ignition switch.

Use the steering wheel controls to access the Multi-Information Display (MID).
Press the "Menu" button on the steering wheel.
Scroll through the options and select "Settings."

4. Reset the Maintenance Light

Once in the Settings menu, navigate to "Maintenance."
Select the "Reset" option for the maintenance light.
Confirm the reset when prompted.

5. Exit the Settings

After confirming the reset, press the "Back" button or the "Menu" button to exit the settings.
Turn off the ignition and then restart the vehicle to check if the maintenance light is off.