how to reset the maintenance light on Toyota Highlander XU70 (2020-Present)?

Toyota Highlander XU70 (2020-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

308 words

Problem Statement

Learn how to reset the maintenance light on your 2020-present Toyota Highlander XU70. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for oil change or service not cleared
•Engine oil change performed but light remains on

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Press the gas pedal three times within five seconds.
3
Turn the ignition off and then back to the 'ON' position.
4
Check if the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is parked safely with the ignition off.

2. Turn on Ignition

Insert the key or ensure the smart key is in the vehicle.
Turn the ignition switch to the "ON" position, ensuring the dashboard lights up, but do not start the engine.

3. Reset Maintenance Light

Quickly press the gas pedal three times in succession within five seconds.
Ensure each press is firm and deliberate to register properly.

4. Verify Reset

Turn the ignition switch back to the "OFF" position.
Turn the ignition back to the "ON" position again and check the maintenance light status.