how to reset the tire pressure light on Toyota Highlander XU70 (2020-Present)

Solution

1. Preparation

• Gather necessary tools: tire pressure gauge, air compressor (if needed).
• Ensure the vehicle is parked on a level surface and the engine is off.

2. Check and Adjust Tire Pressure

• Sub-steps:
  • Remove valve caps from each tire.
  • Use the tire pressure gauge to measure the current pressure of each tire.
  • Refer to the sticker located on the driver’s side door jamb for the recommended tire pressure.
  • If any tire is below the recommended pressure, inflate it using the air compressor to the correct PSI.
  • If any tire is over-inflated, release air until it reaches the recommended level.

3. Reset the Tire Pressure Monitoring System (TPMS)

• Sub-steps:
  • Turn the ignition switch to the ON position without starting the engine.
  • Press the TPMS reset button, which is usually located under the steering wheel or near the driver's side dashboard.
  • Hold the button until the tire pressure light blinks three times and then turns off.
  • Turn off the ignition and then start the vehicle to check if the light has reset.

4. Final Inspection

• Sub-steps:
  • Inspect each tire visually for any signs of damage or leaks after adjusting the pressure.
  • Reinstall all valve caps securely.
  • Ensure that the tire pressure light remains off during the subsequent drive.