FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Toyota Highlander XU70 transmission slips when shifting what’s the issue - Toyota Highlander
Home/Cars/Toyota/Highlander/XU70 (2020-Present)/my Toyota Highlander XU70 transmission slips when shifting what’s the issue

my Toyota Highlander XU70 transmission slips when shifting what’s the issue

Toyota Highlander XU70 (2020-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
492 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Toyota Highlander XU70. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine and transmission to cool before draining fluid.

Symptoms

  • •Transmission slips during acceleration
  • •Delay in gear engagement
  • •Unusual engine RPM fluctuations
  • •Warning lights on the dashboard (e.g., check engine light)
  • •Fluid leaks under the vehicle
  • •Burning smell from the transmission area

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Transmission fluid pump
  • •Drain pan

Parts Required

  • •Transmission fluid
  • •Transmission filter (if applicable)
  • •Gasket for transmission pan
  • •Seals or solenoids (if needed)

Additional Information

Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Gather necessary tools and parts.
  • Wear safety gloves and goggles.
2. Check and Replace Transmission Fluid
  • Sub-steps:
    1. Locate the transmission dipstick and remove it.
    2. Wipe the dipstick clean and reinsert it to check the fluid level.
    3. If low, add the correct type of transmission fluid (check the owner's manual for specifications).
    4. If the fluid is dirty or burnt, drain the old fluid:
      • Position a drain pan under the transmission.
      • Remove the transmission pan bolts and carefully drop the pan.
      • Allow old fluid to drain completely.
    5. Replace the filter if applicable and reinstall the pan with new gasket material.
    6. Refill the transmission with new fluid through the dipstick tube.
3. Inspect and Repair Transmission Components
  • Sub-steps:
    1. Remove the transmission pan if not done previously to inspect internal components.
    2. Check for worn or damaged clutches and bands.
    3. Replace any faulty components as needed (such as seals, gaskets, or clutches).
    4. Reassemble the transmission pan and torque to specifications.
4. Electrical System Check
  • Sub-steps:
    1. Inspect wiring harnesses and connectors leading to the TCM and transmission solenoids for damage or corrosion.
    2. Use a multimeter to test the solenoids for proper resistance and function.
    3. Replace any faulty solenoids or connectors.
5. Final Assembly and Testing
  • Sub-steps:
    1. Reconnect the battery and clear any error codes using the OBD-II scanner.
    2. Conduct a test drive to ensure proper shifting and operation of the transmission.

Tools Required:

  • OBD-II scanner
  • Socket set
  • Torque wrench
  • Multimeter
  • Transmission fluid pump
  • Drain pan

Parts Required:

  • Transmission fluid
  • Transmission filter (if applicable)
  • Gasket for transmission pan
  • Seals or solenoids (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

  • Disconnect the battery before working on electrical systems.
  • Allow the engine and transmission to cool before draining fluid.