how to reset the maintenance light in Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

318 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4. Follow our step-by-step guide for a quick and easy solution.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and the engine is off during this procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No other warning lights present
•Vehicle operates normally otherwise

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Locate the odometer/trip meter button on the dashboard.
4
Press and hold the odometer/trip meter button until the odometer display shows '000000.'
5
Release the button, then turn the ignition off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in park and the engine is turned off.
2
Turn the ignition key to the 'ON' position without starting the engine.
3
Locate the odometer/trip meter button on the dashboard.
4
Press and hold the odometer/trip meter button until the odometer display shows '000000.'
5
Release the button, then turn the ignition off.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked on a level surface.

2. Ignition Position

Insert the key into the ignition.
Turn the key to the "ON" position but do not start the engine. The dashboard lights should illuminate.

3. Resetting the Maintenance Light

Locate the odometer/trip meter button on the dashboard.
Press and hold the odometer/trip meter button.
While holding the button, turn the ignition off and back to the "ON" position again.
Continue holding the button until the odometer display resets to "000000."
Release the button and turn the ignition off again.