FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fourth Generation (2013-2018)/how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

how to reset the maintenance light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
365 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 with this simple step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral with the parking brake engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No changes in engine performance
  • •No error codes or issues with vehicle operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this process.
  • Make sure the vehicle is in a safe, stationary position.
2. Reset the Maintenance Light

  1. Turn Ignition On:

    • Insert the key and turn the ignition to the "ON" position without starting the engine.

  2. Set Odometer to Trip A:

    • Use the trip meter button to toggle the display until "Trip A" is shown on the odometer.

  3. Turn Off Ignition:

    • Completely switch off the ignition by turning the key to the "OFF" position.

  4. Hold Trip Reset Button:

    • Press and hold the trip meter reset button.

  5. Turn Ignition On Again:

    • While holding the trip meter button, turn the ignition back to the "ON" position.

  6. Release Button:

    • Keep holding the trip meter reset button until the maintenance light flashes and then turns off.