how to reset the tire pressure light on my Toyota RAV4 Fourth Generation (2013-2018)

Toyota RAV4 Fourth Generation (2013-2018)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

371 words

Problem Statement

Learn how to reset the tire pressure light on your 2013-2018 Toyota RAV4. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking tire pressures.

Symptoms

•Tire pressure warning light is illuminated on the dashboard.
•Tire pressure levels have been checked and adjusted.
•No other warning lights are present.

Diagnostic Steps

1
Verify current tire pressures using a tire pressure gauge.
2
Ensure all tires, including the spare (if applicable), are inflated to the recommended pressure.
3
Drive the vehicle for a short distance (approximately 10-15 minutes) to allow the system to recalibrate.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are at the correct pressure as per the manufacturer's specifications (found on the driver’s door jamb).
Gather necessary tools and equipment.

2. Locate the TPMS Reset Button

Tools Required: None required for this step.
Find the Tire Pressure Monitoring System (TPMS) reset button, typically located beneath the steering column or to the left of the steering wheel.

3. Reset the TPMS

Steps:
1. With the vehicle in the “On” position (engine running or ignition turned to the "On" position without starting), press and hold the TPMS reset button.
2. Continue holding the button until the tire pressure warning light blinks three times and then turns off.
3. Release the TPMS reset button.

4. Confirm Reset

Tools Required: None.
Turn the ignition off and then start the engine.
Check to ensure that the tire pressure warning light is no longer illuminated.