how do I reset my Toyota RAV4’s maintenance light after an oil change

Solution

1. Preparation

• Ensure the vehicle is parked safely.
• Insert the key into the ignition or press the "Start" button without pressing the brake pedal to power on the electronics.

2. Resetting the Maintenance Light

1. Turn the Ignition On

   • Turn the ignition to the "On" position (do not start the engine).

2. Cycle to Odometer Display

   • Press the odometer/trip meter button until the odometer reading is displayed.

3. Reset the Maintenance Light

   • Press and hold the odometer/trip meter button.
   • While holding the button, turn the ignition off and then back to "On" (do not start the engine).
   • Continue to hold the button until the maintenance light blinks and then turns off, usually taking about 10 seconds.

4. Release the Button

   • Release the odometer/trip meter button after the maintenance light has turned off.

3. Confirmation

• Turn the ignition off and then start the engine to ensure the maintenance light remains off.