how to fix P0011 code on Toyota RAV4 Fifth Generation (2019-present)?

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the negative battery terminal.
• Allow the engine to cool if recently operated.

2. Change Engine Oil and Filter

• Sub-steps:
  1. Raise the vehicle using a jack and secure it with jack stands.
  2. Remove the oil drain plug and allow old oil to completely drain.
  3. Replace the oil filter using an oil filter wrench.
  4. Reinstall the drain plug with a new washer and tighten to the manufacturer’s specification (typically around 30 ft-lbs).
  5. Refill the engine with the recommended oil type (typically 0W-20 synthetic) and volume (around 5-6 quarts).

3. Replace VVT Solenoid

• Sub-steps:
  1. Locate the VVT solenoid on the engine (usually near the camshaft).
  2. Disconnect the electrical connector from the solenoid.
  3. Remove the mounting bolts using a socket set.
  4. Carefully extract the solenoid from its housing.
  5. Install the new VVT solenoid, ensuring it is seated properly.
  6. Reinstall the bolts and tighten to manufacturer specifications (typically around 8-10 ft-lbs).
  7. Reconnect the electrical connector.

4. Clear Error Codes

• Sub-steps:
  1. Reconnect the negative battery terminal.
  2. Use the OBD-II scanner to clear the P0011 code from the ECM.
  3. Start the engine and let it idle for a few minutes.