how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present)

Toyota RAV4 Fifth Generation (2019-present)

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

323 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 Fifth Generation (2019-present) after maintenance service. Step-by-step guide included.

Affected Component

Electrical

Estimated Time

5 minutes

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on a level surface while performing the reset.

1
Ensure the vehicle is in the 'ON' position without starting the engine.
2
Locate the odometer display on the instrument cluster.
3
Check if the vehicle is in the 'Trip A' mode by pressing the trip button if necessary.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

2. Turn on the Ignition

Insert the key into the ignition or press the "START" button without pressing the brake pedal.
Turn the ignition to the "ON" position (the dashboard lights will illuminate, but the engine should not start).

3. Reset the Maintenance Light

With the ignition in the "ON" position, press and hold the trip reset button on the odometer until the display shows "000000".
Release the trip reset button, then turn off the ignition.
Turn the ignition back to the "ON" position again to verify that the maintenance light is off.