FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present) - Toyota RAV4
Home/Cars/Toyota/RAV4/Fifth Generation (2019-present)/how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present)

how to reset the maintenance light on my Toyota RAV4 Fifth Generation (2019-present)

Toyota RAV4 Fifth Generation (2019-present)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
387 words

Problem Statement

Learn how to reset the maintenance light on your 2019-present Toyota RAV4. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is securely parked and in 'Park' mode before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Vehicle may display a message indicating maintenance is due
  • •No change in engine performance or functionality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary tools: None required for this procedure.
2. Reset Maintenance Light

  1. Turn Ignition On

    • Without starting the engine, turn the ignition key to the "ON" position.

  2. Display Odometer

    • Make sure the odometer is displayed on the instrument cluster.

  3. Set Trip Meter

    • Press the trip meter button until "Trip A" is displayed.

  4. Turn Off Ignition

    • Turn the ignition off completely.

  5. Reset Process

    • While holding down the trip meter button, turn the ignition back to the "ON" position (do not start the engine).
    • Continue to hold the trip meter button until the odometer displays "000000" and the maintenance light turns off (this may take about 10 seconds).

  6. Release the Button

    • Once the maintenance light is off and the trip A has reset, release the trip meter button.
3. Close the Ignition
  • Turn the ignition off once again and then start the vehicle to ensure the maintenance light is no longer illuminated.