Toyota RAV4 Fifth Generation (2019-present) alignment issues causing uneven tire wear, how to resolv...

Solution

1. Preparation

• Gather required tools and parts.
• Park the vehicle on a level surface and ensure the engine is off.
• Ensure that tire pressures are set to the recommended levels.

2. Inspect and Replace Suspension Components

• Sub-steps:
  1. Lift the vehicle using a jack and secure it with jack stands.
  2. Remove the front and rear tires to access the suspension components.
  3. Inspect control arms, bushings, and tie rods for any signs of wear or damage.
  4. Replace any damaged components with OEM parts.
  5. Reinstall the tires.

3. Perform Wheel Alignment

• Sub-steps:
  1. Use a professional alignment machine to measure camber, caster, and toe angles.
  2. Adjust the toe angle to the manufacturer’s specifications (typically around 0 to 1/16 inch).
  3. Adjust the camber angle as needed to ensure even contact with the road.
  4. If necessary, adjust the caster angle for improved steering response.
  5. Tighten all bolts to the specified torque values (consult the vehicle's service manual for exact specifications).

4. Test Drive

• Sub-steps:
  1. Lower the vehicle and remove the jack stands.
  2. Take the vehicle for a test drive to ensure proper alignment and check for any pulling or vibrations.
  3. Recheck tire pressure and alignment settings after the test drive.