how to reset oil maintenance light on Toyota RAV4 XA40 (2013-2018)

Solution

1. Preparation

• Gather necessary tools: None required for this procedure.
• Ensure the vehicle is in park (automatic transmission).

2. Access the Maintenance Reset Mode

1. Turn the ignition key to the "ON" position (do not start the engine) or press the start button twice without pressing the brake pedal.
2. Press the gas pedal slowly three times within 5 seconds.

3. Reset the Oil Maintenance Light

1. After pressing the gas pedal three times, turn the ignition off.
2. Turn the ignition back to the "ON" position (again, do not start the engine).
3. Verify the oil maintenance light is no longer illuminated.