FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
333 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 XA40 (2013-2018) with this simple step-by-step guide. No tools required!

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in a safe location when performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other performance issues or warning lights present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked safely and the ignition is off.
2. Resetting the Maintenance Light
  1. Locate the Odometer Reset Button: This is typically found on the instrument cluster.
  2. Press and Hold the Button: While holding the odometer reset button, proceed to the next step.
  3. Turn Ignition On: Turn the ignition key to the "ON" position. Do not start the engine.
  4. Wait for the Light to Blink: Keep holding the odometer reset button until the maintenance light blinks and then goes out (this may take around 10 seconds).
  5. Release the Button: Once the light has turned off, release the odometer reset button.
  6. Turn Ignition Off: Switch the ignition back to the "OFF" position to complete the reset process.