FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
357 words

Problem Statement

Learn how to reset the maintenance light on your Toyota RAV4 XA40 (2013-2018) with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and the parking brake is engaged while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Odometer reading does not reset
  • •Engine oil change indicator remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the necessary tools: None required for this process.
  • Ensure the vehicle is parked safely with the ignition off.
2. Reset Maintenance Light

  1. Turn off the Ignition:

    • Ensure the ignition switch is in the OFF position.

  2. Press and Hold the Odometer/Trip Reset Button:

    • Locate the odometer/trip reset button on the instrument panel.
    • Press and hold the button firmly.

  3. Turn on the Ignition:

    • While still holding the odometer/trip reset button, turn the ignition switch to the ON position (do not start the engine).

  4. Wait for the Maintenance Light to Blink:

    • Keep holding the button until the maintenance light blinks and then turns off, which usually takes about 10 seconds.

  5. Release the Button:

    • Once the light has turned off, release the odometer/trip reset button.