FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)? - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)?

how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)?

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
359 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 XA40. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and the engine is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification of upcoming maintenance due (if applicable)
  • •Engine oil change completed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required, just the vehicle's key

Parts Required

  • •None required.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the engine is off.
  • Gather required tools if necessary (e.g., a cloth to wipe the dashboard).
2. Resetting the Maintenance Light
  • Step 1: Turn the ignition switch to the "OFF" position.
  • Step 2: Locate the trip meter reset button on the instrument panel (usually located near the odometer).
  • Step 3: Press and hold the trip meter reset button.
  • Step 4: While holding the button, turn the ignition switch to the "ON" position (do not start the engine).
  • Step 5: Continue to hold the trip meter reset button until the maintenance light begins to flash and then turns off, which indicates the reset is successful.
  • Step 6: Release the trip meter reset button.