FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

how to reset the maintenance light on my Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
446 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2018 Toyota RAV4 XA40. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location and that the ignition is off before starting the process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Maintenance reminder notification displayed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required.

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: None required.
  • Safety Warnings: Ensure the vehicle is in a safe location and that the ignition is off before starting the process.
2. Reset the Maintenance Light

  1. Turn Ignition ON:

    • Turn the ignition key to the "ON" position without starting the engine (or press the start button twice without pressing the brake pedal).

  2. Check Odometer Display:

    • Confirm that the odometer is displaying the total mileage. If it shows "TRIP A" or "TRIP B", toggle through until the total mileage is displayed.

  3. Turn Ignition OFF:

    • Turn the ignition key to the "OFF" position.

  4. Press and Hold Odometer Reset Button:

    • Locate the odometer reset button (usually found on the instrument cluster) and press and hold it.

  5. Turn Ignition ON Again:

    • While holding the odometer reset button, turn the ignition key back to the "ON" position (or press the start button twice).

  6. Complete the Reset:

    • Continue holding the odometer reset button until the maintenance light flashes and then turns off, indicating a successful reset.