FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA40 (2013-2018)/how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018)

how to reset the maintenance light on Toyota RAV4 XA40 (2013-2018)

Toyota RAV4 XA40 (2013-2018)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
337 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2018 Toyota RAV4 XA40. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position and the engine is off when performing the reset procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other performance issues typically associated with maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key fob

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools such as the vehicle's key fob.
  • Ensure the vehicle is parked safely with the engine off.
2. Resetting the Maintenance Light

  1. Turn on the Ignition

    • With the vehicle in "Park," press the brake pedal and turn the ignition key to the "ON" position (do not start the engine).

  2. Access the Multi-Information Display

    • If equipped, use the steering wheel buttons to navigate through the display until you reach the settings menu.

  3. Select Maintenance

    • Navigate to the "Maintenance" section within the settings menu.

  4. Reset the Maintenance Light

    • Select the option to reset the maintenance light and confirm the action if prompted.

  5. Turn Off Ignition

    • Turn the ignition off and then back on to confirm that the maintenance light has been reset.