how to check for blown fuses in my Toyota RAV4 XA50 (2019-2024)

Solution

1. Preparation

• Tools Needed:
  • Fuse puller or needle-nose pliers
  • Multimeter
• Safety Warning: Ensure the vehicle is turned off and keys are removed from the ignition before starting the inspection.

2. Access Fuse Boxes

• Locate and Open Fuse Boxes:
  • Interior Fuse Box: Typically located under the dashboard on the driver’s side. Open the cover to access the fuses.
  • Engine Compartment Fuse Box: Usually found near the battery. Remove the cover to access the fuses.

3. Inspect Fuses

• Visual Inspection:
  • Look for any blown fuses (broken wire inside the fuse or discoloration).
• Use of Fuse Puller:
  • Carefully use the fuse puller or pliers to remove suspected fuses for a closer inspection.

4. Test with Multimeter

• Check for Continuity:
  • Set the multimeter to the continuity setting.
  • Place one probe on each end of the fuse. If there is continuity, the fuse is good; if not, it needs replacement.

5. Replace Blown Fuses

• Replace with Identical Rating:
  • If a fuse is blown, replace it with a new fuse of the same amperage rating as specified in the owner’s manual.
• Secure the Fuse Box:
  • Once all checks and replacements are completed, ensure that the fuse box covers are securely fastened.