how to clear the check engine light codes on my Toyota RAV4 XA50 (2019-2024)

Solution

1. Preparation

• Gather tools and equipment: OBD-II scanner, vehicle owner's manual (for reference).
• Ensure the vehicle is in a safe, well-ventilated area and parked on a level surface.

2. Connect OBD-II Scanner

• Locate the OBD-II port under the dashboard on the driver's side.
• Plug the OBD-II scanner into the port securely.

3. Read Diagnostic Trouble Codes

• Turn the ignition key to the "ON" position but do not start the engine.
• Follow the scanner's prompts to read and document any existing DTCs.

4. Clear Codes

• Navigate to the "Erase Codes" function on the OBD-II scanner.
• Select the option and confirm to clear the codes. The scanner will indicate when the process is complete.

5. Disconnect Scanner

• Safely unplug the OBD-II scanner from the diagnostic port.
• Store the scanner and any recorded DTCs in a safe place for future reference.