how to replace the cabin air filter on my Toyota RAV4 XA50 (2019-2024)

Solution

1. Preparation

• Tools Required:
  • Flathead screwdriver (if necessary)
  • Clean microfiber cloth
• Park the vehicle in a well-ventilated area and ensure the engine is off and cool.

2. Access the Cabin Air Filter

1. Open the glove compartment by pulling it down.
2. If applicable, remove the dampener arm on the right side of the glove compartment by gently pulling it off.
3. Squeeze the sides of the glove compartment inward to unclip it and allow it to drop down completely.
4. Locate the cabin air filter access cover, which is usually at the back of the glove compartment area.

3. Remove the Old Cabin Air Filter

1. Unclip or unscrew the access cover to the cabin air filter.
2. Pull out the old cabin air filter carefully, noting its orientation for installation of the new filter (there is typically an airflow direction arrow on the filter).

4. Install the New Cabin Air Filter

1. Take the new cabin air filter and ensure it is oriented correctly, matching the airflow direction indicated on the filter.
2. Insert the new filter into the housing securely.
3. Reattach the access cover by clipping or screwing it back into place.

5. Reassemble the Glove Compartment

1. Lift the glove compartment back into position.
2. Reattach the dampener arm if it was removed.
3. Ensure that the glove compartment is securely closed.