FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset maintenance light on Toyota RAV4 XA50 (2019-2024) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA50 (2019-2024)/how to reset maintenance light on Toyota RAV4 XA50 (2019-2024)

how to reset maintenance light on Toyota RAV4 XA50 (2019-2024)

Toyota RAV4 XA50 (2019-2024)

Error Codes
Less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
345 words

Problem Statement

Learn how to reset the maintenance light on your 2019-2024 Toyota RAV4 XA50 with this simple step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
Less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle is due for scheduled maintenance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
Less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
2. Reset Maintenance Light
  1. Access the Trip Meter Reset Button: Locate the trip meter reset button on the instrument cluster, typically found near the odometer.
  2. Turn Off the Ignition: Ensure that the vehicle is fully turned off.
  3. Press and Hold: Press and hold the trip meter reset button.
  4. Turn Ignition On: While holding the button, turn the ignition key to the "ON" position (do not start the engine).
  5. Wait for Reset: Continue holding the button until the maintenance light blinks and then turns off (approximately 10 seconds).
  6. Release the Button: Once the light turns off, release the trip meter reset button.