FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil maintenance light on my Toyota RAV4 XA50 (2019-2024) - Toyota RAV4
Home/Cars/Toyota/RAV4/XA50 (2019-2024)/how to reset the oil maintenance light on my Toyota RAV4 XA50 (2019-2024)

how to reset the oil maintenance light on my Toyota RAV4 XA50 (2019-2024)

Toyota RAV4 XA50 (2019-2024)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
365 words

Problem Statement

Learn how to reset the oil maintenance light on your 2019-2024 Toyota RAV4 XA50. Step-by-step guide to ensure your dashboard is clear of warnings.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode to prevent it from rolling during the procedure.

Symptoms

  • •Oil maintenance light is illuminated on the dashboard
  • •Reminder for oil change is displayed
  • •Engine oil has been changed but the warning light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for the reset process.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a flat surface.
  • Make sure the vehicle is in "Park" mode.
  • Have the vehicle's key fob available.
2. Access the Vehicle's Ignition
  • Insert the key into the ignition or have the smart key fob ready.
  • Ensure all doors are closed and the vehicle is secure.
3. Reset the Oil Maintenance Light
  1. Turn the Ignition On:

    • Turn the ignition to the "ON" position without starting the engine.
    • Wait for the dashboard lights to illuminate.
  2. Press the Gas Pedal:

    • Press and release the gas pedal three times in quick succession within 5 seconds.
    • Ensure you are pressing down fully each time for the system to register.
  3. Check the Light:

    • Observe the oil maintenance light on the dashboard.
    • If the light turns off, the reset is successful.