my Toyota RAV4 XA50 (2019-2024) makes a clicking noise when turning what's going on

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.

2. Inspect and Replace CV Joints

• Tools Required: Socket set, jack and jack stands, torque wrench, CV joint puller (if needed).
• Sub-steps:
  1. Safely lift the front of the vehicle and secure with jack stands.
  2. Remove the front wheels using the socket set.
  3. Inspect the CV joint boots for tears or grease leakage; if damaged, proceed to replace.
  4. Remove the axle nut using the appropriate socket.
  5. Disconnect the lower control arm from the knuckle to allow for better access to the CV joint.
  6. Use the CV joint puller to remove the CV joint from the transmission side.
  7. Install the new CV joint and reassemble in the reverse order. Ensure the axle nut is torqued to manufacturer specifications (typically around 150-200 lb-ft).

3. Inspect and Replace Suspension Components

• Tools Required: Socket set, torque wrench, pry bar, suspension tool kit.
• Sub-steps:
  1. Check for any damaged control arms, bushings, or ball joints.
  2. If any components are worn, remove them using the socket set and pry bar.
  3. Replace with new parts, ensuring all bolts are torqued to manufacturer specifications.
  4. Reinstall the wheels and lower the vehicle back to the ground.