why does my Toyota RAV4 XA50 (2019-2024) have a popping sound in the front

Solution

1. Preparation

• Tools Required: Jack and jack stands, socket set, torque wrench, pry bar, stethoscope.
• Ensure the vehicle is on a flat surface and the parking brake is engaged.
• Disconnect the battery if working on electrical components.

2. Inspect and Replace Suspension Components

1. Raise the Vehicle:
   • Use a jack to lift the front of the vehicle and secure it on jack stands.
2. Remove Front Wheels:
   • Use a socket set to remove the lug nuts and take off the front wheels.
3. Check Sway Bar Links:
   • Inspect the sway bar links for wear. If they are damaged, replace them with new ones.
   • Torque specifications for sway bar links: Typically 35 ft-lbs (check manufacturer guidelines).
4. Examine Strut Assembly:
   • Inspect struts for leaks. If leaking, replace the struts.
   • Follow strut installation instructions, typically including proper alignment and torque settings (usually 50-60 ft-lbs).
5. Inspect CV Joints and Axles:
   • Check CV joint boots for tears. If boot damage is found, replace the affected CV joint or axle.
   • Ensure all components are tightened to the manufacturer’s torque specifications.

3. Test Drive and Final Inspection

• Reinstall the wheels and lower the vehicle.
• Perform a test drive to verify the popping sound is eliminated.
• Listen for any remaining noises and recheck all components if necessary.