FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present)? - Toyota Tacoma
Home/Cars/Toyota/Tacoma/N300 (2016-Present)/how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present)?

how to reset the maintenance light on my Toyota Tacoma N300 (2016-Present)?

Toyota Tacoma N300 (2016-Present)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
379 words

Problem Statement

Learn how to reset the maintenance light on your 2016-Present Toyota Tacoma N300 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notifications for service displayed
  • •Vehicle performance issues may be unrelated but coinciding with maintenance intervals

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary tools: none required for this procedure.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition:

    • Confirm the ignition is fully in the "OFF" position.

  2. Access the Odometer/Trip Button:

    • Locate the "Odometer/Trip" button on the instrument cluster.

  3. Initiate the Reset Sequence:

    • Press and hold the "Odometer/Trip" button.
    • While holding the button, turn the ignition to the "ON" position (do not start the engine).

  4. Complete the Reset:

    • Keep holding the "Odometer/Trip" button until the maintenance light starts blinking and then turns off (approximately 10 seconds).
    • Release the button.

  5. Verify the Reset:

    • Turn the ignition back to the "OFF" position, then start the engine to ensure the maintenance light is reset.