how to replace the windshield wipers on my Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

30 minutes

Time

easy

Difficulty

low

Severity

3 min read

448 words

Problem Statement

Step-by-step guide to replace windshield wipers on Volkswagen Golf (2013-2020). Learn symptoms, diagnostic steps, and tools required for a successful repair.

Affected Component

Body/Interior

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the ignition is off and wipers are in the down position before starting the replacement to avoid damage or injury.

Symptoms

•Streaks or smears on the windshield when wipers are in use
•Wipers making noise during operation
•Wipers not making full contact with the windshield
•Wiper blades are cracked or damaged
•Wipers skipping or jumping across the windshield

Diagnostic Steps

1
Inspect the wiper blades for visible damage or wear.
2
Check the wiper arm operation to ensure it moves freely.
3
Test the wiper functionality at various speeds to assess performance.
4
Measure the size of the existing wiper blades for replacement compatibility.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Clean cloth for windshield cleaning

Parts Required

•New windshield wiper blades (driver's side and passenger's side)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather all necessary tools and parts.
Park the vehicle on a level surface and turn off the ignition.
Remove any items obstructing access to the wipers.

2. Lift the Wiper Arms

Carefully lift each wiper arm away from the windshield until they are in a vertical position.
Ensure the arms are stable as they are lifted to avoid snapping back.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade connector.
Press the release tab and slide the wiper blade off the wiper arm.
Repeat for both wiper blades.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the wiper blade into the arm until you hear a click, indicating it’s securely attached.
Ensure that the blade is seated correctly to avoid detachment during use.

5. Lower Wiper Arms

Gently lower the wiper arms back onto the windshield.
Ensure they sit flat against the glass without obstruction.

6. Test Wipers

Turn on the ignition and activate the wipers to check functionality.
Test at different speeds to ensure smooth operation without noise or skipping.