FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Volkswagen Golf Seventh Generation (2013-2020) - Volkswagen Golf
Home/Cars/Volkswagen/Golf/Eighth Generation (2020-present)/how to reset the maintenance light on Volkswagen Golf Seventh Generation (2013-2020)

how to reset the maintenance light on Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes
10-15 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
350 words

Problem Statement

Learn how to reset the maintenance light on your 2013-2020 Volkswagen Golf. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe position to avoid accidents when performing this reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Notification message indicating service is due
  • •No other operational issues present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
10-15 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and on a level surface.
  • Have the vehicle in "ON" position without starting the engine.
  • Gather necessary tools: None required for this process.
2. Reset the Maintenance Light
  1. With the vehicle in the "ON" position, locate the trip odometer button on the dashboard.
  2. Press and hold the trip odometer button until the display changes to show the current mileage.
  3. While still holding the button, turn the ignition off and then back to the "ON" position.
  4. Continue to hold the trip odometer button until the maintenance light starts to blink and then goes out.
  5. Release the trip odometer button to finalize the reset.