FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil light on Volkswagen Golf Seventh Generation (2013-2020) - Volkswagen Golf
Home/Cars/Volkswagen/Golf/Eighth Generation (2020-present)/how to reset the oil light on Volkswagen Golf Seventh Generation (2013-2020)

how to reset the oil light on Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
407 words

Problem Statement

Learn how to reset the oil light on your Volkswagen Golf VII (2013-2020) after an oil change. Step-by-step guide for a quick and easy reset.

Affected Component
Engine
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before attempting the reset.

Symptoms

  • •Oil change light is illuminated on the dashboard.
  • •Warning message displayed indicating the need for an oil change.
  • •Engine oil level may be low or dirty.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None specifically required for the reset process.

Parts Required

  • •None required for the reset process.

Additional Information

Affected Component
Engine
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure that the vehicle is parked on a level surface.
  • Gather any necessary tools, if applicable (e.g., an OBD-II scanner for additional checks).
2. Reset Oil Light
  1. Turn Ignition Off: Place the vehicle in park and turn the ignition key to the "OFF" position.
  2. Press Gas Pedal: Fully depress the gas pedal and hold it down.
  3. Turn Ignition On: While holding the gas pedal down, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for Light Reset: Observe the dashboard; the oil change light should blink and then turn off after a few seconds. Continue holding the gas pedal until this occurs.
  5. Confirm Reset: Release the gas pedal and turn the ignition back to the "OFF" position.