Volkswagen Golf Seventh Generation (2013-2020) EPS light is on, what does it mean

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

455 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the EPS light issue in Volkswagen Golf (2013-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Steering

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before inspecting the power steering pump.

Symptoms

•EPS warning light illuminated on the dashboard
•Difficulty steering the vehicle, especially at low speeds
•Steering feels heavy or unresponsive
•Unusual noises from the steering column or rack
•Intermittent power steering assistance

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the power steering fluid level and condition.
3
Inspect the power steering pump and belt for wear or damage.
4
Look for any visible leaks in the power steering system.
5
Inspect the electrical connections to the power steering control module.
6
Test the steering angle sensor for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Screwdrivers

Parts Required

•Power steering fluid
•Power steering pump (if needed)
•Serpentine belt (if needed)
•Steering angle sensor (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify specific issues.
2
Check the power steering fluid level and condition.
3
Inspect the power steering pump and belt for wear or damage.
4
Look for any visible leaks in the power steering system.
5
Inspect the electrical connections to the power steering control module.
6
Test the steering angle sensor for proper operation.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to ensure safety.

2. Check Power Steering Fluid

Locate the power steering fluid reservoir.
Remove the cap and check the fluid level; top off with manufacturer-recommended fluid if low.
Inspect fluid for contamination; replace fluid if dirty.

3. Inspect Power Steering Pump and Belt

Visually inspect the power steering pump for leaks or damage.
Check the condition of the serpentine belt for fraying or wear.
Replace the power steering pump or belt if necessary.

4. Electrical Connection Inspection

Reconnect the battery and turn on the ignition without starting the engine.
Inspect the wiring harness and connectors leading to the power steering control module.
Repair or replace any damaged wires or connectors.

5. Steering Angle Sensor Testing

Use a multimeter to check the resistance of the steering angle sensor.
Compare readings to manufacturer specifications; replace the sensor if out of spec.

Tools Required:

OBD-II scanner
Multimeter
Socket set
Torque wrench
Screwdrivers

Parts Required:

Power steering fluid
Power steering pump (if needed)
Serpentine belt (if needed)
Steering angle sensor (if needed)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Disconnect battery before working on electrical systems.
Allow the engine to cool before inspecting the power steering pump.