Volkswagen Golf Seventh Generation (2013-2020) tire pressure monitoring system not working

Volkswagen Golf Eighth Generation (2020-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

618 words

Problem Statement

Learn how to diagnose and fix the TPMS not working issue in Volkswagen Golf (2013-2020). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow tires to cool before performing any work to avoid burns.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•Warning message displayed on the infotainment system
•Intermittent or no communication with the TPMS sensors
•Increased tire wear due to improper inflation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any TPMS-related error codes using a diagnostic scanner.
2
Inspect the tire pressure of all tires using a reliable tire pressure gauge.
3
Check the battery status of the TPMS sensors by accessing the sensor information through the vehicle's diagnostic interface.
4
Visually inspect each tire for any physical damage or obstructions that may affect sensor performance.
5
Verify the configuration settings of the TPMS module in the vehicle's settings menu.
6
Perform a TPMS reset using the vehicle's onboard diagnostic system or through the reset button (if equipped).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Tire pressure gauge
•Torque wrench
•TPMS reset tool

Parts Required

•TPMS sensors (if faulty)
•Valve stem caps (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any TPMS-related error codes using a diagnostic scanner.
2
Inspect the tire pressure of all tires using a reliable tire pressure gauge.
3
Check the battery status of the TPMS sensors by accessing the sensor information through the vehicle's diagnostic interface.
4
Visually inspect each tire for any physical damage or obstructions that may affect sensor performance.
5
Verify the configuration settings of the TPMS module in the vehicle's settings menu.
6
Perform a TPMS reset using the vehicle's onboard diagnostic system or through the reset button (if equipped).

Solution

1. Preparation

Gather all necessary tools and parts.
Ensure the vehicle is parked on a level surface.
Disconnect the battery to ensure safety while working on electrical components.

Tools Required:

OBD-II scanner
Tire pressure gauge
Torque wrench
TPMS reset tool (if not using the vehicle's onboard system)

2. Inspect and Replace TPMS Sensors

Remove the Wheel
- Loosen lug nuts with a socket set.
- Lift the vehicle using a jack and secure it with jack stands.
- Remove the lug nuts and take off the wheel.
Access TPMS Sensor
- Remove the valve stem cap from the tire.
- Deflate the tire by using a tire valve tool to release air.
- Unscrew the TPMS sensor from the valve stem.
Replace or Repair Sensor
- If the sensor is damaged, replace it with a new one. Ensure the new sensor is compatible with the Volkswagen Golf.
- If just the battery of the sensor is dead, replace the battery per manufacturer specifications.
Reinstall Sensor
- Secure the new or repaired sensor back onto the valve stem.
- Inflate the tire to the recommended pressure.
- Reinstall the wheel and torque the lug nuts to the manufacturer’s specifications (typically around 100 Nm).

3. Reset TPMS

Reconnect Battery
- Reconnect the battery terminals and ensure they are tight.
Perform TPMS Reset
- Use the OBD-II scanner to reset the TPMS or follow the vehicle's manual instructions for a manual reset (often involves pressing a reset button or navigating through the vehicle settings).
Test System
- After resetting, drive the vehicle for a short distance to allow the system to recalibrate and check for warning lights.