FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what are the common steering issues in Volkswagen Golf Seventh Generation (2013-2020) - Volkswagen Golf
Home/Cars/Volkswagen/Golf/Eighth Generation (2020-present)/what are the common steering issues in Volkswagen Golf Seventh Generation (2013-2020)

what are the common steering issues in Volkswagen Golf Seventh Generation (2013-2020)

Volkswagen Golf Eighth Generation (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
541 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover how to diagnose and repair common steering issues in Volkswagen Golf 7 (2013-2020). Step-by-step guide with symptoms, diagnostics, and solutions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components associated with the power steering system.

Symptoms

  • •Difficulty turning the steering wheel
  • •Unusual noises (clunking, grinding, or squeaking) when steering
  • •Steering wheel vibrations or oscillations
  • •Uneven tire wear
  • •Steering wheel off-center when driving straight
  • •Warning lights related to the power steering system illuminated on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Wrench set
  • •Ball joint separator
  • •Torque wrench
  • •Fluid catch pan

Parts Required

  • •Power steering fluid
  • •Power steering pump (if needed)
  • •Tie rod ends (if worn)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is on a flat surface and securely elevated with jack stands.
2. Check and Fill Power Steering Fluid
  • Locate the power steering reservoir.
  • Remove the cap and check the fluid level.
  • If low, add the manufacturer-recommended power steering fluid to the reservoir.
  • Replace the cap securely.
3. Inspect and Replace Power Steering Pump (if necessary)
  • Disconnect the battery to prevent electrical short circuits.
  • Remove the serpentine belt using a socket set to relieve tension from the tensioner.
  • Disconnect the power steering lines from the pump using a wrench; be prepared for fluid spillage.
  • Unbolt the power steering pump from its mounting bracket using the socket set.
  • Install the new power steering pump by reversing the removal steps; torque the mounting bolts to manufacturer specifications.
4. Check and Replace Tie Rod Ends (if worn)
  • Use a socket set to remove the wheels for better access to the steering components.
  • Inspect the tie rod ends for any signs of wear or damage.
  • If replacement is needed, disconnect the tie rod end from the steering knuckle using a ball joint separator.
  • Install the new tie rod end and tighten to the specified torque value.
5. Perform a Wheel Alignment
  • After any suspension or steering component replacement, take the vehicle to a professional for a wheel alignment to ensure proper steering geometry.