how to reset the service light on Volkswagen Golf MK6 (2009-2014)

Volkswagen Golf MK7 (2015-2019)

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

398 words

Problem Statement

Learn how to reset the service light on Volkswagen Golf MK6 (2009-2014) with this step-by-step guide. Quick and easy instructions for maintenance.

Affected Component

Electrical

Estimated Time

5-10 minutes

Important safety information - read before proceeding

•Ensure the vehicle is parked on a flat surface and in 'Park' or 'Neutral' before performing the reset.

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Navigate to the trip odometer using the trip reset button (located on the dashboard).
4
Press and hold the trip reset button while turning the ignition key to the 'ON' position.
5
Continue holding the trip reset button until the service light resets, usually indicated by a flashing or disappearing light.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key is removed from the ignition.
2
Insert the key into the ignition and turn it to the 'ON' position without starting the engine.
3
Navigate to the trip odometer using the trip reset button (located on the dashboard).
4
Press and hold the trip reset button while turning the ignition key to the 'ON' position.
5
Continue holding the trip reset button until the service light resets, usually indicated by a flashing or disappearing light.

Solution

1. Preparation

2. Resetting the Service Light

Turn Off the Ignition:
- Ensure the vehicle is completely turned off before starting the reset process.
Insert the Key:
- Insert the key into the ignition and turn it to the "ON" position (without starting the engine).
Access the Trip Odometer:
- Use the trip reset button to cycle through the dashboard display until you reach the trip odometer.
Reset the Light:
- Press and hold the trip reset button.
- While holding the button, turn the ignition to the "ON" position again.
- Keep holding the trip reset button until the service light resets (look for a flashing light or a confirmation message).
Check the Reset:
- Turn the ignition off and then back on to verify that the service light is no longer illuminated.