my Volkswagen Golf MK6 (2009-2014) wipers are not working what to check

Volkswagen Golf MK7 (2015-2019)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

547 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix windshield wiper issues in Volkswagen Golf MK6 (2009-2014). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the vehicle to cool before performing any work near the engine or electrical components.

Symptoms

•Wipers do not move at all when activated
•Wipers are stuck in one position
•Wipers move erratically or at inconsistent speeds
•No sound from wiper motor when activated
•Washer fluid does not spray

Diagnostic Steps

1
Check the wiper switch for proper operation by testing it in different positions.
2
Inspect the fuse related to the windshield wipers for any signs of a blown fuse.
3
Examine the wiper motor for any visible damage or corrosion.
4
Test the wiper motor by applying direct power to it to determine if it operates.
5
Inspect the wiper linkage for any signs of damage or disconnection.
6
Check the wiring harness for any frayed wires or loose connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Pliers
•Wiper arm puller
•Screwdrivers

Parts Required

•Wiper motor (if faulty)
•Wiper linkage components (if damaged)
•Wiper fuse (if blown)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the wiper switch for proper operation by testing it in different positions.
2
Inspect the fuse related to the windshield wipers for any signs of a blown fuse.
3
Examine the wiper motor for any visible damage or corrosion.
4
Test the wiper motor by applying direct power to it to determine if it operates.
5
Inspect the wiper linkage for any signs of damage or disconnection.
6
Check the wiring harness for any frayed wires or loose connections.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the ignition is off.
Disconnect the negative battery terminal to prevent electrical shocks.

2. Inspect and Replace Fuse

Locate the fuse box (usually found under the dashboard or in the engine compartment).
Identify the wiper fuse using the diagram on the fuse box cover.
Remove the fuse using a fuse puller or pliers.
Inspect the fuse for continuity; if blown, replace it with a fuse of the same amperage.

3. Test and Replace Wiper Motor

Locate the wiper motor, usually found at the base of the windshield.
Disconnect the electrical connector from the wiper motor.
Use a multimeter to test for voltage at the connector when the wipers are activated.
If voltage is present but the motor does not operate, replace the wiper motor.
If no voltage is detected, trace the wiring back to the switch for issues.

4. Inspect and Repair Wiper Linkage

Remove the wiper arms using a wiper arm puller if necessary.
Disconnect the wiper linkage from the motor.
Inspect for any damaged or disconnected linkage components.
Replace any damaged linkage parts and reassemble.

5. Reassemble and Test

Reattach the wiper motor and linkage.
Reconnect the wiper arms and ensure they are correctly positioned.
Reconnect the negative battery terminal.
Test the wipers to ensure they operate correctly.