FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the EPS warning light on my Volkswagen Golf MK7.5 (2020-Present)? - Volkswagen Golf
Home/Cars/Volkswagen/Golf/MK7.5 (2020-Present)/how to reset the EPS warning light on my Volkswagen Golf MK7.5 (2020-Present)?

how to reset the EPS warning light on my Volkswagen Golf MK7.5 (2020-Present)?

Volkswagen Golf MK7.5 (2020-Present)

Error Codes
1-2 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
501 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to reset the EPS warning light on your Volkswagen Golf MK7.5. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Steering
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always disconnect the battery before performing electrical work on the vehicle.

Symptoms

  • •EPS warning light illuminated on the dashboard
  • •Heavy or unresponsive steering
  • •No power assist when steering
  • •Possible error codes related to EPS present in the system
  • •Intermittent steering assistance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Safety gloves

Parts Required

  • •Appropriate power steering fluid (if needed)

Additional Information

Affected Component
Steering
Estimated Time
1-2 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the ignition is turned off.
  • Tools required: OBD-II scanner, socket set, multimeter, and safety gloves.
2. Scan for Error Codes
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Turn the ignition to the "ON" position without starting the engine.
  • Follow the scanner's instructions to retrieve and record any error codes relating to the EPS.
3. Check Power Steering Fluid
  • Locate the power steering fluid reservoir.
  • Remove the cap and check the fluid level against the recommended marks.
  • If necessary, top off with the appropriate power steering fluid as specified in the owner’s manual.
4. Battery Voltage Check
  • Use a multimeter to measure the vehicle's battery voltage.
  • Ensure that the voltage is above 12.4 volts; if not, charge or replace the battery.
5. Reset the EPS System
  • If error codes are cleared and the fluid level is fine, disconnect the negative terminal of the battery.
  • Wait for at least 10 minutes to allow the system to reset.
  • Reconnect the battery terminal, ensuring a secure connection.
6. Test Drive
  • Start the vehicle and check if the EPS light is still illuminated.
  • Test the steering for proper response and assist.